NCCOOS Trac Projects: Top | Web | Platforms | Processing | Viz | Sprints | Sandbox | (Wind)

{5} Assigned, Active Tickets by Owner (Full Description) (5 matches)

List tickets assigned, group by ticket owner. This report demonstrates the use of full-row display.

haines

Ticket Summary Component Milestone Type Created
Description
#33 Finalize Hazards Management Plan (HMP) at UNC deployment Tower-System-2010 task 02/14/11
  • Fill out and submit draft HMP to UNC EHS.
  • Work with Navy to complete HMP.
  • Add to HMP type and range of vessel used for installation and decommission of equipment versus maintenance and operation.
#18 Determine power and communication requirements for UNC components system integration Tower-System-2010 task 10/06/10

Evaluate the power consumption of each sensor and data amounts that would be downloaded every hour for SODAR, ASIMET Suite, and Bottom ADCP and CTD (using an acoustic modem, if there is an existing pull-tube).

#21 Determine if pull-tube can be installed deployment Tower-System-2010 task 10/13/10
  • Contact Dave Malone to see if he can install if we provide the tube
#65 Resolve comm problem between CSI Loggernet and Iridium RUDICS communication Buoy-System-2010 task 05/02/12
  • Connect to CSI DataLogger? CR1000 via Rudics/Iridium and CSI LoggerNet? using telnet session with static IP, CR1000 responds and accepts the connection but never gets table definitions.
  • Contacted DJ Snodgrass at CSI-Canada. He worked on it some but had to stop.
  • Spoke with Kevin Simpson at YSI -- They have some upcoming project(s?) that need to resolve this issue too. YSI might be working on it too.
#62 Repair Wind Dir on ASIMET s/n UNC235 communication Tower-System-2010 task 01/13/12

After installing all the ASIMET modules on the roof of Murray, and some run time, determined that one of the ASIMET wind modules is not returning Wind direction

  • confirm that only wind vain and maybe tilt y and x, and heading).
  • get RMA from WHOI
  • return to WHOI for repair
Note: See TracReports for help on using and creating reports.