NCCOOS Trac Projects: Top | Web | Platforms | Processing | Viz | Sprints | Sandbox | (Wind)

Ticket #46 (task)

Opened 13 years ago

Last modified 12 years ago

Configure and Test Iridium/Rudics static IPs

Status: closed (fixed)

Reported by: haines Assigned to: haines
Priority: major Milestone: Buoy-System-2010
Component: communication Version:
Severity: must have Keywords:
Cc:
  • Establish Rudics service through Joubeh,
  • request activation of SIM's through Joubeh (see attached instructions)
  • tested Iridium modems using CSI Loggernet. There are telnet handshaking commands to issue to the ground station that they call the specifically assigned MSISDN-C number.

Attachments

JouBeh Iridium Data Services Instructions v1.2 March 21, 2011.pdf (67.8 kB) - added by haines on 08/02/11 10:38:06.
Joubeh activiation instructions
JouBeh Iridium Data Services Instructions v1.2 March 21, 2011.2.pdf (67.8 kB) - added by haines on 08/02/11 10:39:14.
Joubeh activiation instructions

Change History

07/12/11 11:16:23: Modified by haines

  • status changed from new to assigned.

07/12/11 17:04:50: Modified by haines

  • description changed.
  • summary changed from Configure and Test Iridium/Rudics router and static IPs to Configure LoggerNet and Test Iridium/Rudics static IPs.

07/12/11 17:06:05: Modified by haines

  • description changed.

07/12/11 17:07:18: Modified by haines

  • description changed.

08/02/11 10:38:06: Modified by haines

  • attachment JouBeh Iridium Data Services Instructions v1.2 March 21, 2011.pdf added.

Joubeh activiation instructions

08/02/11 10:39:14: Modified by haines

  • attachment JouBeh Iridium Data Services Instructions v1.2 March 21, 2011.2.pdf added.

Joubeh activiation instructions

08/02/11 10:39:26: Modified by haines

  • description changed.

Service is established. Now have static IP for Mobile Terminated (MT) calls to modems and DNIS to turb.marine.unc.edu for Mobile (MO) originated calls.

08/02/11 11:34:13: Modified by haines

  • summary changed from Configure LoggerNet and Test Iridium/Rudics static IPs to Configure and Test Iridium/Rudics static IPs.

10/11/11 17:22:26: Modified by haines

  • description changed.
Subject: RE: DataLogger and Rudics/Iridium
Date: Tue, 11 Oct 2011 06:31:40 -0600
From: DJ Snodgrass <DJ.Snodgrass@campbellsci.ca>
To: <sara_haines@unc.edu>


Sara,

To date, I have found that the iridium network seems to be passing extra
data bytes which in turn is corrupting the data stream to loggernet. I
am in the process of proving this and will be speaking with Iridium once
I know for sure.

DJ

-----Original Message-----
From: Sara Haines [mailto:sara_haines@unc.edu] 
Sent: October-10-11 6:10 PM
To: DJ Snodgrass; Kevin Simpson
Subject: DataLogger and Rudics/Iridium

Just touching base ... since I was away for the couple of weeks.

Have you had any luck with connecting to DataLogger via Rudics/Iridium
and LoggerNet?  Did CSI have any suggestions from the logs you sent
them?

s

05/02/12 08:38:25: Modified by haines

  • status changed from assigned to closed.
  • resolution set to fixed.
  • description changed.